Return
  • Pneumatic Three-Way Control Valvewatermark
  • Pneumatic Three-Way Control Valve

    Product model: ZMAX/ZMAQ


    Valve body material: WCB, 304, 316, 316L


    Material of spool: 304, 316 + STL PTFE


    Seat Material: 304, 316 + STL; PTFE


    Connection mode: flange, thread, welding


    Three-way Structure: Three-way diverging, Three-way converging


    Bonnet Type: Standard type, Cryogenic type, Finned (heat dissipation) type, Bellows seal type


    Pneumatic Actuator: Multi-spring diaphragm actuator, Air-to-Open (ATO) type, Air-to-Close (ATC) type


    Accessories: Electro-pneumatic positioner, Air filter regulator, Handwheel (manual override), Lock-up valve

    Product Overview
    The pneumatic diaphragm three-way control valve is mainly used to divide one inlet fluid into two outlet fluids, or to combine two inlet fluids into one outlet fluid. Three-way valves are divided into converging control valves and diverging control valves. When the valve size and pressure difference are relatively small, a converging valve can also be used as a diverging valve, but the valve size will be large. Do not use a diverging valve in occasions with high pressure differences.

    Product Types

    • Diverging three-way control valve

    • Converging three-way control valve

    Valve Body

    • Type: Three-way cast structure

    • Nominal Diameter: DN20–DN200

    • Nominal Pressure: ANSI 150, 300, 600LB / JIS 10, 16, 20, 30, 40K / PN1.6, 2.5, 4.0, 6.4 MPa

    • Connection Type: Flanged: FF, RF, RJ, and LG

    • Flange Standard: ANSI B16.5, JIS B2201 / JB/T 79.1 PN1.6MPa, JB/T 79.2

    • Threaded: DIN, NPT, RC, BSP, G, etc.

    • Welded: GB 12224-89

    • Sealing Face Type: PN16 raised face (RF), PN40 recessed face (FM)

    • Material: WCB, 304, 316, 316L

    • Bonnet: Standard type (-20°C to +200°C), Cryogenic type (-60°C to -196°C), Finned type (-40°C to 450°C), Bellows seal type.

    • Gland Type: Clamp plate type

    • Packing: V-type PTFE, flexible graphite

    Valve Internals

    • Plug Type: Single-seat plunger type

    • Plug & Seat: 304, 316 + STL

    • Flow Characteristic: Equal percentage, linear, quick opening

    Actuator

    • Type: Multi-spring diaphragm actuator

    • Action: Direct action, Reverse action

    • Diaphragm Material: NBR reinforced with polyester fabric

    • Spring Range: 20–100KPa, 40–200KPa, 80–240KPa

    • Supply Air Pressure: 0.14, 0.16, 0.28, 0.40 MPa

    Action Types

    • Air-to-Close (FO) (with direct-acting actuator): When air supply fails, the vertical direction is connected (open).

    • Air-to-Open (FC) (with reverse-acting actuator): When air supply fails, the horizontal direction is connected (open).

    Accessories (Optional)
    Electro-pneumatic positioner, air filter regulator, handwheel mechanism, limit switch, solenoid valve, lock-up valve, and others.

    Product Performance

    • Rated Kv Value: Refer to table

    • Flow Characteristic: Linear, equal percentage, quick opening

    • Adjustable Range (Rangeability): 30:1

    • Leakage Class: Metal seal: <0.01 (ANSI B16.104-1976 Class IV); Soft seal: <0.00001%

    • Hysteresis: <1% of full stroke (with positioner); <3%-5% of full stroke (without positioner)

    • Basic Error: <±1% of full stroke (with positioner); <±5% of full stroke (without positioner)